Menu
Working hours
Store Hours:
  • Mon-Fri 9 a.m. - 10 p.m. Moscow time

Lada X-Ray 1.8L with M86 ECU from Паулюс © Paulus 2019

  • Availability: In Stock
  • Product Code: lada-x-ray-1-8l-m86-paulus-2019
Reviews: (0)
Brands Paulus
Lada X-Ray 1.8L with M86 ECU from Паулюс © Paulus 2019

A package of dynamic, optimized firmware for chip tuning of Lada X-Ray 1.8L cars with M86 ECU from Паулюс ©Paulus 2019

Set for tuning VAZ Xray with engines 1.8

Checksums on all versions are fixed to the standard value. In brackets the factory firmware is indicated.
Replacing software with incompatible software will result in loss of IMMO training and registrar data.
Compatibility and interchangeability:

Firmware I785XAA1, I785XMA1, I785XCM3 - for the ramp of a new sample. You should pay attention, since the software can be updated at the dealer, and the rail is old. Or vice versa. How to bring in compliance is decided independently. Or not to lead - but this is not correct.

Folder I785XF07 (I785XF06, I786XE05) - meaning it is recommended to update 07 software two, indicated in brackets.

Folder I785XMF8 (I785XMI7, I785XMH6, I785XMG5) - meaning it is recommended to update MF8 with the three software indicated in brackets.

Versions of MR2x_startpower_GBO4prop - dual-mode firmware. That is, switching calibrations for the optimal phase of the maximum pressure of the cycle of the propane-butane mixture (differences in the combustion phase) while fully moving on gasoline, of course.
Switching modes of GBO versions (MR2x ...) is organized by the signal DK2 (Connector 2 large, pin H4)
1st mode gasoline - DK2 in the "air" (open or signal more than 0.2 volts)
2nd GBO mode - DK2 to ground (signal below 0.2 volts)

Download manuals for working with ECU.

Firmware for 1 ID - 300 rubles.
If you want to purchase individual firmwares from the Lada X-Ray 1.8L с ЭБУ М86 от Паулюс ©Paulus 2019 package, place an order, choose a payment method, and in the comment specify which firmware YOU need.

Buy a set of firmware Lada X-Ray 1.8L с ЭБУ М86 от Паулюс ©Paulus 2019 (specify the identifier of the required firmware and the amount)

When paying, payment processing takes place on the website of the electronic payment system, which has passed the international certification. This means that your confidential data (card details, registration data, etc.) does not go to the online store, their processing is fully protected and no one can get personal and bank customer data

Download a set of firmware Lada X-Ray 1.8L с ЭБУ М86 от Паулюс ©Paulus 2019

List of firmware from the kit:

AT_I785XAA1 (2083FD5B)
CVN_MR2x_startpower_GBO4prop_2018_I785XAA1_V4.bin
CVN_startpower 2018_I785XAA1_V4.bin
CVN_startpower 2018_I785XAA1__E2_V4.bin

AT_I785XF07 (I785XF06 I786XE05) (675DBE1D)
CVN startpower 2017__I785XF07_V3.bin
CVN startpower 2017__I785XF07_V3_E2.bin
CVN_MR2x_startpower_GBO4prop_I785XF07_V3.bin

AT_I785XG07 (F38056B4)
CVN_MR2x_startpower_GBO4prop_2018_I785XG07_V4.bin
CVN_startpower 2018_I785XG07_V4.bin
CVN_startpower 2018_I785XG07_V4_E2.bin

MT_I785XCM3 (6EAA24F0)
CVN_MR2x_startpower_GBO4prop_2018_ I785XCM3_v4.bin
CVN_startpower 2018_ I785XCM3_v4.bin
CVN_startpower 2018_ I785XCM3_v4_E2.bin

MT_I785XMA1_(21A008E1)
CVN_MR2x_startpower_GBO4prop_2018_I785XMA1_V4.bin
CVN_startpower 2018_I785XMA1_V4.bin
CVN_startpower 2018_I785XMA1_V4_E2.bin

MT_I785XMF8_(I785XMI7 I785XMH6 I785XMG5) (48E963EA)
CVN startpower 2018_ I785XMF8_V3.bin
CVN startpower 2018_ I785XMF8_V3_E2.bin
CVN_MR2x_startpower_GBO4prop_2018_ I785XMF8_V3.bin

Calibration: Паулюс ©Paulus

1 200.00р.
Ex Tax: 1 200.00р.
Found this product cheaper?
Reviews0
0/ 5
average product rating
0
0
0
0
0
There are no reviews for this product.

Latest reviews