A package of dynamic, optimized firmware for chip tuning UAZ (УАЗ ) cars with Bosch M (E) 17.9.71 ECUs from Паулюс © Paulus and Dik, including versions for GBO (ГБО) and noIMMO (IMMO Off), for recording via BSL. Upd7 2018

Version "v3 max" for pokatushek off road, heavy use on the "big" wheels and just for stung)
They have high momentum recoil but are hardly economical in combat use.

Due to the organization of the memory, Bosch M (E) 17.9.71 when overwriting
it is necessary to save part of the individual data for each block.
For this, a utility is included with the firmware.

When using the utility, the procedure for preparing the firmware for recording is as follows:

- Read native firmware with ECU
- Run the utility from the BoschME17971Util.exe folding kit
- Click the "Open read firmware" button and select the just read
- If everything is done correctly, the program will show the Identifiers and display the path to the open firmware
- Press the button "Find and copy (prepare for recording) suitable from the database"
- The program will report on the prepared firmware and save them in a folder next to the original firmware read
- Select the folder from the prepared program folder ("Prepared_XX.XX.2018_XX.XX.XX") and load it into the block.

3-mode gas firmware from Paulus and DiK.
!!! Fill strictly completely firmware !!!
Implemented the identification of modes, for the convenience of switching control.

Ways to switch the modes of versions MR3x_GBO4_Santeh ...:
1st mode gasoline - normal operation of the DTV sensor (from 0.2 to 4.85 volts)
2nd mode HBO4 propane - DTV signal pulled to the ground (less than 0.2 volts)
3rd mode of HBO "plumbing" propane - DTV signal "in the air" (more than 4.85 volts), nozzles and gas pump (shutdown delay 5 seconds) in Gas mode are software disabled.

P.S. IN CONNECTION WITH DETECTED CRITICAL CHANGES OF TARGING OF DTV OF BLOCKS M (E) 17.9.71
WE STRONGLY RECOMMEND UPDATING TO ALL CLIENTS 3X MODE FIRMWARE ON VERSION FROM RELEASE Upd3 and higher.
SYMPTOMS - DO NOT START THE ENGINE ON GASOLINE AT NEGATIVE TEMPERATURES (ONLY FOR THREE-MODE VERSIONS!).

Download manuals for working with ECU.

Firmware for 1 ID - 300 rubles.
If you want to purchase individual firmwares from the УАЗ с ЭБУ УАЗ с ЭБУ Bosch M(E)17.9.71 GBO noIMMO от Паулюс ©Paulus package, place an order, choose a payment method, and in the comment specify which firmware YOU need.

Buy a set of firmware УАЗ с ЭБУ УАЗ с ЭБУ Bosch M(E)17.9.71 GBO noIMMO от Паулюс ©Paulus (specify the identifier of the required firmware and the amount)

When paying, payment processing takes place on the website of the electronic payment system, which has passed the international certification. This means that your confidential data (card details, registration data, etc.) does not go to the online store, their processing is fully protected and no one can get personal and bank customer data

Download a set of firmware УАЗ с ЭБУ УАЗ с ЭБУ Bosch M(E)17.9.71 GBO noIMMO от Паулюс ©Paulus

List of firmware from the kit:

E-Gaz

10SW000073_VS35B476
10SW000073_VS35B476.bin
MR3x_StartPower_GBO4_santeh_10SW000073_VS35B476.bin
Startpower 2015_10SW000073_VS35B476 V2 E2.bin
Startpower 2015_10SW000073_VS35B476 V2.bin
Startpower 2015_10SW000073_VS35B476_max_ V3 E2.bin
Startpower 2015_10SW000073_VS35B476_max_ V3.bin
NIvers
NI_10SW000073_VS35B476.bin
NI_MR3x_StartPower_GBO4_santeh_10SW000073_VS35B476.bin
NI_Startpower 2015_10SW000073_VS35B476 V2 E2.bin
NI_Startpower 2015_10SW000073_VS35B476 V2.bin
NI_Startpower 2015_10SW000073_VS35B476_max_ V3 E2.bin
NI_Startpower 2015_10SW000073_VS35B476_max_ V3.bin

10SW005072_VS35B561
10SW005072_VS35B561.bin
MR3x_StartPower_GBO4_santeh_10SW005072_VS35B561.bin
startpower 2016_10SW005072_VS35B561 E2.bin
startpower 2016_10SW005072_VS35B561.bin
startpower max_ 2016_10SW005072_VS35B561 E2.bin
startpower max_ 2016_10SW005072_VS35B561.bin
NIvers
NI_10SW005072_VS35B561.bin
NI_MR3x_StartPower_GBO4_santeh_10SW005072_VS35B561.bin
NI_startpower 2016_10SW005072_VS35B561 E2.bin
NI_startpower 2016_10SW005072_VS35B561.bin
NI_startpower max_ 2016_10SW005072_VS35B561 E2.bin
NI_startpower max_ 2016_10SW005072_VS35B561.bin

10SW009205_VS37B476
10SW009205_VS37B476.bin
MR3x_StartPower_GBO4_santeh_10SW009205_VS37B476.bin
startpower  max_2018_10SW009205_VS37B476.bin
startpower  max_2018_10SW009205_VS37B476_E2.bin
startpower 2018_10SW009205_VS37B476.bin
startpower 2018_10SW009205_VS37B476_E2.bin

10SW022263_VS37B570
10SW022263_VS37B570.bin
MR3x_StartPower_GBO4_santeh_10SW022263_VS37B570.bin
startpower  max_2018_10SW022263_VS37B570.bin
startpower  max_2018_10SW022263_VS37B570_E2.bin
startpower 2018_10SW022263_VS37B570.bin
startpower 2018_10SW022263_VS37B570_E2.bin

10SW025734_VS35B571
10SW025734_VS35B571.bin
MR3x_StartPower_GBO4_santeh_10SW025734_VS35B571.bin
startpower 2018__10SW025734_VS35B571.bin
startpower 2018__10SW025734_VS35B571_E2.bin
startpower 2018__10SW025734_VS35B571_MAX.bin
startpower 2018__10SW025734_VS35B571_MAX_E2.bin
NIvers
NI_10SW025734_VS35B571.bin
NI_MR3x_StartPower_GBO4_santeh_10SW025734_VS35B571.bin
NI_startpower 2018__10SW025734_VS35B571.bin
NI_startpower 2018__10SW025734_VS35B571_E2.bin
NI_startpower 2018__10SW025734_VS35B571_MAX.bin
NI_startpower 2018__10SW025734_VS35B571_MAX_E2.bin

10SW040106_VS35B580
10SW040106_VS35B580.bin
MR3x_StartPower_GBO4_santeh_10SW040106_VS35B580.bin
startpower_2018_10SW040106_VS35B580.bin
startpower_2018_10SW040106_VS35B580_E2.bin
startpower_max_2018_10SW040106_VS35B580_.bin
startpower_max_2018_10SW040106_VS35B580_E2.bin
NIvers
NI_10SW040106_VS35B580.bin
NI_MR3x_StartPower_GBO4_santeh_10SW040106_VS35B580.bin
NI_startpower_2018_10SW040106_VS35B580.bin
NI_startpower_2018_10SW040106_VS35B580_E2.bin
NI_startpower_max_2018_10SW040106_VS35B580_.bin
NI_startpower_max_2018_10SW040106_VS35B580_E2.bin

1037539916_VS35B473
1037539916_VS35B473.bin
MR3x_StartPower_GBO4_santeh_1037539916_VS35B473 v3.bin
StartPower2015_1037539916_VS35B473 E2 v3 max.bin
StartPower2015_1037539916_VS35B473 v2.bin
StartPower2015_1037539916_VS35B473 v3 max.bin
StartPower2015_1037539916_VS35B473_E2 v2.bin
NIvers
NI_1037539916_VS35B473.bin
NI_MR3x_StartPower_GBO4_santeh_1037539916_VS35B473 v3.bin
NI_StartPower2015_1037539916_VS35B473 E2 v3 max.bin
NI_StartPower2015_1037539916_VS35B473 v2.bin
NI_StartPower2015_1037539916_VS35B473 v3 max.bin
NI_StartPower2015_1037539916_VS35B473_E2 v2.bin

1037539917_VS37B473
1037539917_VS37B473.bin
MR3x_StartPower_GBO4_santeh_1037539917_VS37B473 v3.bin
StartPower2015_1037539917_VS37B473 E2 v3 max .bin
StartPower2015_1037539917_VS37B473 v2.bin
StartPower2015_1037539917_VS37B473 v3 max .bin
StartPower2015_1037539917_VS37B473_E2 v2.bin

M-Gaz

10SW000072_VS36B476
10SW000072_VS36B476.bin
MR3x_Startpower_GBO-4_Santeh_v4(3)_VS36B476.bin
Startpower 2016_VS36B476_10SW000072.bin
Startpower 2016_VS36B476_10SW000072_ E2.bin
Startpower 2016_VS36B476_10SW000072_E2_max.bin
Startpower 2016_VS36B476_10SW000072_max.bin

10SW005071_VS36B560
10SW005071_VS36B560.bin
MR3x_StartPower_GBO4_santeh_10SW005071_VS36B560.bin
startpower 2018_10SW005071_VS36B560.bin
startpower 2018_10SW005071_VS36B560_E2.bin
startpower max_ 2018_10SW005071_VS36B560.bin
startpower max_ 2018_10SW005071_VS36B560_E2.bin

1037539918_VS36B473
1037539918_VS36B473.bin
MR3x_GBO4_Santeh_1037539918_VS36B473 v3.bin
StartPower2015_1037539918_VS36B473 E2 v3 max .bin
StartPower2015_1037539918_VS36B473 v2.bin
StartPower2015_1037539918_VS36B473 v3 max .bin
StartPower2015_1037539918_VS36B473_E2 v2 .bin

Calibration: Паулюс и Дик © Paulus&Dik

Startpower - only gasoline tuning,
1037539918_VS36B473 - identifier
E2 - Euro 2 toxicity standards.
NI - versions without smart authorization.
MR3x - 3-mode gas firmware from Paulus and DiK.
GBO4_Santeh - 1st mode gasoline, 2nd mode HBO4 propane, 3rd mode HBO with mortise plumbing propane.

© Paulus & DiK (www.oktja.ru)